Just Engaged Feyonce DIY HTV Iron On Tank Top

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Nothing like celebrating your fiancee status than with a fun tank top, so we had to include another option after creating our Engaged AF Tank Top! :)

I made the decal with Gold Confetti Glitter HTV but any color would come out great! This is an easy decal to weed and is a great beginner project if you haven’t done a lot of HTV Projects before. :)

If you already have a Cricut, this project is also much more affordable than buying one, which is always a plus!. :) You can also check out our other Tank Top Projects Here!

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl (I used White HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

Check out our other tank top projects here!

DIY Bride Squad Bridal Party Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

This week is a week of Bachelorette Party Projects! :) While these Bride Squad tank tops can be used for many bridal events or as a Bridesmaid Proposal Tank top, I love them for a casual beachy bachelorette too!

For the Bride Squad Tank Tops, I used a Lilac Tank top with Easyweed Purple HTV and for the Bride I used a White Glitter HTV on a Warm Gray tank top and I love how they turned out! These are also easy designs for those who are still beginners to the weeding and HTV world, I had zero issues weeding or transferring them. :)

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

7. Repeat with all remaining tank tops! :) If you are ready to try more tank tops, check out our other tank top projects here!

DIY Honeymoonin' HTV Iron On Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When you get married on the beach, you honeymoon on the beach! To end our week of Beach Wedding Projects, we are featuring a Honeymoonin’ Tank top for you to wear on vacation after your big day!

I made the decal with White Easyweed HTV but any color would come out great! This was an easy project to weed as well as being pretty forgiving on placement if you haven’t done a lot of HTV Projects before.

If you already have a Cricut, this project is also much more affordable than buying one, as with most of our tank tops. You can also check out our other Tank Top Projects Here!

Supplies:
Blank Tank Tops
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl (I used White HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top.

Check out our other tank top projects here!

DIY Two Less Fish in the Sea HTV Iron On Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Koozies are wonderful wedding favors, especially for Beach or Destination Weddings! To Start off our Destination Wedding Koozie Designs, I went with my personal favorite beachy wedding saying, Two Less Fish in the Sea!

I made them in Mermaid Blue Glitter HTV and Jade Easeyweed HTV on white koozies; the Mermaid Blue Glitter ones are definetely my favorite! These designs are easy to weed and an easy project to make over a weekend; however, if you have to make a bunch its nice to have a group to help you weed them since that’s the most time intensive part of this project.

---

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Koozie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous ironing koozies, so I check them every 5 second or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

I always love koozies for using up extra bits of HTV and they are the perfect favors for a beachy destination wedding! Check out more of our Koozie Projects here! :)

DIY Welcome to the Beach HTV Iron on Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

This week, we are going to be having some fun with some beach Wedding Inspired Wedding Projects. To start it off, I designed these two toned Beach Wedding Welcome Guest Totes.

I love the idea of giving tote bags for beach weddings, its so useful for storing towels, sunscreen, as well as more standard welcome items like itineraries and water bottles

I made these designs two toned, where the text and outline of the sea shell were cut in Black Easyweed HTV and the inside of the sea shell was cut in Gold Confetti Glitter HTV. The design itsself was easy to weed and was easy to align and layer the two colors without any trouble.

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation. You should have two pieces of HTV, the inside color of the shell and the outline of the shell with the text.

4. Iron your tote bag to remove any creases, then center the text and shell outline design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the first layer of the design on the Tote Bag.

7. Now, arrange the shell HTV decal on top of the text decal, arranging it such that the shell is equally within the outline and the bottom edges of the “B” cutout is aligned with the text, as shown to the righ.

8. Cover the shell with parchment paper, then iron the shell decal on top of the existing layer, using your iron like a small heat press. Press the iron on each part of the design for at least 30 seconds, then overlap the last position as you move the iron across the design.

9. Remove the backing, leaving the second layer on the tote bag. Repeat with all remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Bride Squad HTV Bachelorette Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I’m always a fan of Bachelorette Group Tote Bags for all your ladies to keep their belongings in during all the fun of your bachelorette night or weekend! There are always so many fun designs that you can make for Bachelorette Parties, I wanted to add to my collection! In that spirit, I designed these cute and bold Bride Squad Tote Bags!

For my totes, I used Pink Easyweed HTV for the Bride Squad Bags and Silver Glitter HTV for the Bride Bag and I absolutely love how they turned out! This simple, bold design goes with any bachelorette theme and is an easy project for people who are new to Iron on Transfer Projects. :)

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tote bag to remove any creases, then center the design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the Tote Bag. Repeat with all the remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Iron On HTV Brides Babes Tee Shirts

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Bridesmaid Proposal T Shirts are always a fun choice for brides to give to their girls for prewedding events, DIY nights, and for a general feeling of wedding camaraderie. As another option for Bridesmaid Proposal Wearables, I designed these feminine but modern Bride’s Babes T Shirt Decals.

I made the decals with White and Silver Easyweed Vinyl, using some of the leftover Tshirts I had, and while I like how they turned out I’d like to experiment with other color combinations to see what looks best!

Supplies:
Blank Tee Shirts
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
T-Shirt Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your t-shirt to remove any creases, then center the design over the top half of the t-shirt, as shown above. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the t-shirt. Repeat with all the remaining t-shirts.

Check out our other TShirt and Tank Top Projects Here for more inspiration! :)

DIY Bridesmaid Getting Ready HTV Iron on Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

One of the most useful things our venue provided us the day of our wedding that I never would have thought about were tote bags for us and our bridal party to store our getting ready clothes and any other personal items in during the wedding. In that spirit, I wanted to design a simple and beautiful set that could easily go with any wedding.

For my first wedding welcome tote, I went with something cute, girly, and simple. After all, sometimes simple is best and this tote can be used for any out of town wedding guest bag, not just a beach. :) I used Easyweed Gold HTV for these bags, but I would love to see them in a Rose Gold Glitter HTV! :)

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tote bag to remove any creases, then center the design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tote bag. Repeat with all the remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Totes Engaged HTV Iron on Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I’m so excited that one of my best friend’s recently got engaged and it’s definitely inspired a good amount of “Just Engaged” swag. This pretty and punny “Totes Engaged” Tote Bag is the perfect gift for a newly engaged bride, or to make yourself to start your wedding DIY journey off right!

I used Silver Glitter HTV for this bag, but you could easily make them any color you like! :) This is a great project to begin with as it’s easy to weed and is almost square in shape, so it can easily be resized to fit pockets on other tote bags.

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tote bag to remove any creases, then center the design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tote bag. Repeat with all the remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Honeymoon Hubs and Wifey Shirts and Tank Tops

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

What better way to celebrate your new married status on your honeymoon than with some super cute Hubs and Wifey shirts! I made two different designs, Wifey and Wifey for Lifey, because I couldn’t decide which one I liked more. Plus it never hurts to have options so you can pick your favorite too!

I made them on both Tshirts and Tank tops, mainly because I like tank tops and the hubs like Tshirts, so when we wear them they will already be our favorite kind of top! :) It’s kinda hard to see in the pictures, but I made the Wifey and Wifey for lifey decals in Rainbow White Glitter HTV and it is just the right amount of sparkly! The Hubs is not so into glitter (fair) so he got Easyweed Black HTV. :) These are great projects for beginners, nice big decals that are easy to weed and can take some heat while you are figuring out all the fun of iron on decals! :)

Supplies:
Blank Tank Tops or TShirts (Womens or Mens)
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tank Top Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tank tops and t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used White Rainbow Glitter HTV and Easyweed Black HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tank top/Tshirt to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tank top. Repeat with all the remaining tops.

Looking for more fun Tank top and T Shirt Designs? Check out our other Tank Top and TShirt Tutorials Here!

DIY Drunk in Love HTV Iron On Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Nothing like a set of matching koozies to get your bachelorette party started on the right foot (or in this case, with the right drink!). To go with our Drunk in Love Bachelorette T Shirts, I decided these cute little koozies were just the thing!

I made them in Old Gold Glitter HTV and Confetti Glitter HTV on black, white, and pink koozies but I think the black with Confetti Glitter HTV are my favorite! Despite the small lettering, I didn’t have any problems weeding the designs, but keep a lookout for the little pieces to make sure they don’t come off in the weeding process (such as the openings for the k’s and s’s).

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Koozie Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Old Gold Glitter HTV and Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous ironing koozies, so I check them every 5 second or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

I always love koozies for using up extra bits of HTV and they are the perfect accessory to any bachelor or bachelorette party! Check out more of our Koozie Projects here!

DIY Welcome to Our Wedding HTV Iron on Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When you have guests from out of town flying in for your wedding, it is always nice to give them a little wedding welcome bag with snacks, water, and an itinerary for the wedding festivities! If you are having a beachy destination wedding, tote bags are a great choice! Not only are they great for holding any goodies you want to give your guests, but they can be used throughout your guest’s vacation to hold towels, flip flops, and all their beach accessories.

For my first wedding welcome tote, I went with something cute, girly, and simple. After all, sometimes simple is best and this tote can be used for any out of town wedding guest bag, not just a beach. :) I used Easyweed Silver HTV for these bags, but you could easily make them any color you like to match your wedding’s theme! :)

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the tote bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Silver Easyweed HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tote bag to remove any creases, then center the design in the middle of the tote. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the tote bag. Repeat with all the remaining tote bags.

Check out more of our Tote Bag Projects Here! :)

DIY Iron On HTV Drunk in Love Bachelorette Tee Shirts

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If there’s one thing I love making for bachelorette parties, its tank tops and t-shirts! I adore everyone matching and it has an added bonus of making it easier to keep track of everyone. These T-shirts are perfect for any Bar Crawl Style Bachelorette, and were very easy to make. :) I made these in Confetti Glitter HTV and I love how they turned out, but I would be tempted to make them in the Rose Gold Glitter next time! :)

Supplies:
Blank Tee Shirts
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
T-Shirt Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the t-shirts the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your t-shirt to remove any creases, then center the design over the top half of the t-shirt, as shown above. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the t-shirt. Repeat with all the remaining t-shirts.

Check out our other TShirt and Tank Top Projects Here for more inspiration! :)

DIY HTV Best Bridesmaid Ever Tote Bags

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Who doesn’t love tote bags when it comes to Bridesmaid Gifts, they are so useful and perfect for overnight bags and storing toiletries and extras for your wedding day! To go with the other Tote Bags we’ve made, these Best Bridesmaid Ever Totes are great and affordable swag for all your girls!

In keeping with our Valentine’s Day Coloring right now, I made mine on Pink Tote Bags with Gold Confetti HTV but I would almost repeat the project with non glitter HTV to help with visibility on the bags in the future

I made a total of 4 different bags so you could have one for each of your leading ladies: bridesmaid, maid of honor, mother of the bride and mother of the groom. You can easily customize these for getting ready bags in whatever colors you like, and they are perfect for storing your girl’s clothes when the are getting ready and in their dresses for the wedding!

Supplies:
Blank Tote Bags
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Tote Bag Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the Tote Bags the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Gold Confetti Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your Tote Bag to remove any creases, then arrange the design in the center of the tote bag, using the handles as a guide . Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the Tote Bag. Repeat with all the remaining Tote Bags.

HTV Iron On Sporty Team Bride T Shirts

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I love crafting for bridal parties and in honor of those sporty college days (and football season I guess) I made these Sporty Team Bride T Shirts!

I made these designs both in one color and two colors, and while I like them both I think that the two color best! I will say that you do have to waste a good amount of vinyl for the outline which does hurt the soul, so the single tone is great for getting the most use out of your HTV with that sporty feel.

Supplies:
Blank T Shirts
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
T Shirt Design Cut Files

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the t-shirts the way you like.

Single Color

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl (I used Silver Glitter HTV) with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your T Shirt to remove any creases, then center the design over the top half of the T Shirt. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the T Shirt. Repeat with all the remaining T Shirts.

Two Toned

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. You will notice that the Cricut software divides the design colors into separate mats on its own. Cut the designs in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down. I used Silver Glitter HTV for the inner letters and Purple Easyweed HTV for the outline.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your T Shirt to remove any creases, then center the inner letters of the design over the top half of the T Shirt. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing to leave your first color of HTV on the T Shirt.

7. Now, arrange the outline design around the ironed on letters as shown below. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

8. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. Repeat the same ironing process as above for the second design color.

9. Remove the backing from the design, leaving the completed design on the T Shirt Repeat with all the remaining T Shirts.