DIY HTV Getting Ready Bridal Party Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Koozies are always a fun, casual way to make everyone feel like a part of the party and these bridal party koozies are the perfect choice for keeping your getting ready beverages cool!  I made decals for not only the bridesmaids, maid of honor, matron of honor (if you have one), and the bride; but also for the mothers of the bride and groom so that you can make sure all of your ladies feel extra special at your wedding!

 I made these decals in Gold Glitter HTV on White Koozies and they turned out beautifully, but I also would love them on pink koozies so that only the bride is drinking with white!  I used the font Clarissa while designing these decals, which you can download for free at dafont.com to use for personalizing these koozies or any of your other wedding projects!

---

Supplies:

Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Koozie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous about ironing koozies, so I check them every 5 seconds or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

Check out more of our Koozie Projects Here! :)

DIY HTV Animal Paw Print Patterned Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

While making all these fun critter inspired onesies for the spring, I couldn’t help but think of all the little paw prints of the baby animals in the forest. While my newest baby niece is not  crawling yet, she undoubtedly will be all too soon, and before she starts leaving footprints of her own, she will be looking cute in this Paw Print Patterned onesie!

I made the decal from Black Easyweed HTV on a Hand Dyed Emerald Onesie, perfect for any foresty little sprite you know!! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and each paw print set is small enough to fit entirely under your iron in one press. Experiment with different placements of the paw prints and make your own custom patterns.

Make sure to check out our other Baby Onesie Project for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then arrange the decals on the onesie for transfer. I arranged one decal along the left side of the onesie and the other going from under the right arm to the neckline, as shown in the photos. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the each paw print decal set under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Repeat the iron press process with the remaining paw print decal to complete the onesie. You can easily pair this design with any of our other critter inspired onesies, but my favorite is with the Cutest Critter in the Forest Onesie!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

Baby Bear DIY HTV Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

One of my best friends is expecting a baby soon and received an adorable Mama Bear themed sweater for the winter, and as soon as I saw it I knew there had to be a baby bear onesie to go with it for when her little one arrived! Thus, my baby bear onesie was born! Since her sweater has the silhouette of a bear with Mama cut out of it oh, it was only fitting that her little girls onesie was a little bear cub silhouette with baby cut out!  

The decal was made with Brown Easyweed HTV on a Hand Dyed Red Onesie and it turned out so adorable! Can't wait to see what it looks like in silver glitter and purple next!  This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press.

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Remove the parchment paper and peel the clear backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Zero Fox Given Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

As soon as I heard of this clever pun involving foxes, I had to use it in my critter themed onesie collection! Because if there's one thing newborns and little ones are good at, it's not giving any cares about things when they are hungry or need a nap.

For this onesie, I made the decal in Black Easyweed Heat Transfer Vinyl on a Hand Dyed Orange Onesie, and it turned out super perfect considering the foxy theme! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press.

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. I love pairing this design with yesterday’s onesie, the Cutest Critter in the Forest Onesie!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

Cutest Critter in the Forest DIY HTV Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Spring is in the air and all the babies are decked out in their adorable spring outfits! Springtime in a forest is my personal favorite, so in honor of spring I designed some woodland inspired onesies, starting with this Cutest Critter in the Forest Onesie!

I made the decal from White Glitter HTV on a Hand Dyed Blue Green Onesie and it turned out absolutely adorable! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press. I used the font Betty for the decal, which you can download for free from dafont.com

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Groomsmen Getting Ready Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

No better way to keep your drink cold and match as a group than koozies! These modern and classic groomsmen koozies are a great choice not only to mail as groomsmen proposals to any of your groom’s out of town bridal party members, but also for getting ready drinks for the boys on your wedding day.

I used Silver HTV  for the Groomsman and Best Man decals and Silver Glitter HTV for the Groom’s on Black Koozies, but it’s easy to completely personalize the color combination to your own wedding colors and metallics.

I used the fonts Clarissa and Generica designing these decals, which can be downloaded for free at dafont.com to further personalize the koozies with your groomsmen’s names, your wedding date, or anything you like!

---

Supplies:

Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Koozie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

5. Set your Iron to the second Highest setting and press the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous about ironing koozies, so I check them every 5 seconds or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

Check out more of our Koozie Projects here! :)

DIY HTV I Do Crew Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

We don’t want to leave our ladies out of the koozie fun, so I had to make a set with my favorite bridal party saying of the year! These I Do Crew Koozies are an adorable choice for your maids and even better for including lots of ladies in your wedding group if you want a small group of Bridesmaids! 

I made the I Do Crew Decals in Lilac Easyweed HTV and the Bride Decal in Silver Glitter HTV on White Neoprene Koozies and they turned out so cute! Check out our other Koozie Projects Here for other cute koozies you can make for Bridal Party Proposals, Bachelorette Parties, or even as Wedding Favors!

---

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Koozie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous ironing koozies, so I check them every 5 second or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

DIY HTV Sporty Groomsman Wedding Koozies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

It’s almost Superbowl Time! While I’m not the sportiest of ladies myself, I can appreciate a good sporty themed koozie, and your Groomsmen are sure to enjoy one too! These Sporty Groomsmen Koozies are the perfect accessory for your best boys to sip beers for the game, have wedding day drinks with the groom, or to be invited to the bridal party!

I used Old Gold Glitter HTV  for the Groomsman and Best Man decals and White Glitter HTV for the Groom’s on Black Koozies, but it would be awesome to make them in your boy’s favorite team colors!

---

Supplies:
Blank Koozies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Koozie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the koozies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design(s) in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down. 

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Center the design in the middle of the koozie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the the iron down firmly on the design, not ironing but rather using it as a small heat press. The koozie design should be completely covered by the iron. Pressing the iron on the design for 15 - 30 seconds, mine took only 20 seconds. :) I’m always a little nervous ironing koozies, so I check them every 5 seconds or so until the design has transferred. :)

6. Remove the backing from the design, leaving the design on the koozie. Repeat with all the remaining koozies.

Check out more of our Koozie Projects here! :)

DIY HTV You are my Sunshine Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Growing up, one of our favorite childhood songs was “You are my Sunshine” and I think it is such a fitting saying for a new baby coming into your life. Despite the sleepiness and tough times, your baby is still a little ray of sunshine! So for the last (newborn) onesie I designed, I made this beautiful “You are my Sunshine” two toned onesie!

The decal was made in Turquoise Easyweed HTV for the top lettering and Gold Metal Foil HTV for the bottom lettering on a Hand Dyed Yellow Onesie. I absolutely love the onesie and decal color combination, bright and cheerful just like your little ray of sunshine! If you wish to use them for other projects, this decal was made with the fonts Betty and Clarissa, both of which are available at dafont.com!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed and Metal Look HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down. Repeat for the remaining color of your decal.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie, shiny side up. Start by arranging the whole design (both colors) so that you can see how they will fit together, with the “Sunshine” Decal under the other text decal. Once the design is placed to your satisfaction, remove the “You are my” lettering, leaving only the “Sunshine” Decal to transfer first.  Cover with parchment paper, making sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds for Easyweed or Glitter HTV or 10-15 seconds for Metal Look HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Now, arrange the second decal back on the onesie, fitting the text to run along the top of the “Sunshine” lettering. Cover with parchment paper and again press the design for 20-30 seconds, checking every 10 seconds until the second design is adhered. I was worried about Foil HTV I had already transferred, but it didn’t seem to hurt it by repressing it with the iron.

6. Remove the parchment paper and peel the clear backing from the decal, leaving the end of the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Brand Spankin New Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

There are so many cute designs and sayings to make for onesies, I had to include this adorable Brand Spankin’ New onesie in my decal collection! This two toned onesie is a super fun and easy choice to gift to any “Brand Spankin” New Born you know!

I made the decal in Tiffany Blue Easyweed HTV and Silver Glitter HTV on a Hand Dyed Emerald Onesie and it came out adorable! The fonts used were Bebas Kai and Passenger Script, in case you want to use them to design your own projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie, shiny side up.. Start by arranging the whole design (both colors) so that you can see how they will fit together, with the “Spankin” Decal under the other text decal. Once the design is placed to your satisfaction, remove the “Brand - New” lettering, leaving only the “Spankin” Decal to transfer first.  Cover with parchment paper, making sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Now, arrange the second decal back on the onesie, sandwiching the “Spankin” decal between “Brand” and “New.” Cover with parchment paper and again press the design for at least 20-30 seconds.

6. Remove the parchment paper and peel the clear backing from the decal, leaving the end of the design on the onesie.

I paired this onesie with our Hello World Onesie for a fun blue and green onesie combo, which would you pick? I love pairing onesies together or creating sets, so try pairing this with any of our other Onesie Designs to make a handmade and heartfelt gift for any newborn in your life!

DIY HTV New to the Crew Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

My sister’s favorite halloween costume is being a pirate, so much so she's done it for the last several years! So her baby can join the fun, I designed this “New to the Crew” Onesie to celebrate her newest crew member! Regardless of your seafaring ways, this onesie is an adorable choice to add to any newborn ensemble!

In keeping with our pirate theme, I made the decal from Gold Metal Foil HTV on a Hand Dyed Red Onesie, perfect for a tiny future pirate! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press.

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat
Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for 10-15 seconds for the Metal HTV or at least 20-30 seconds for Easyweed or Glitter HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Adventure Awaits Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

As any mother can attest, when you have your first baby you are quite literally setting off into a new life adventure! And no better way to bedeck a new baby than in this Adventure Awaits HTV Onesie! I went with a nautical theme on this onesie, complete with a little sailboat to set sail for the new adventures of mom and baby!

I made the decal in Tiffany Blue Easyweed Heat Transfer Vinyl on a Hand Dyed Blue Green Onesie and it turned out great! If you are looking to use this font for other projects, I used Bio Monster, a font that is free to use from dafont.com.

This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press! Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Hello World Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I had so much fun designing all sorts of onesies for my sister’s new baby, so we are starting our onesie designs of the year with a very appropriate newborn onesie that literally tells the world hello! :) This Hello World Onesie is a perfect choice for any newborn ensemble and is a beautiful handmade gift for any mama to be! 

I made the decal in Yellow Easyweed Heat Transfer Vinyl on a Hand Dyed Denim Onesie and I absolutely adore the color combination! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press. It's also a means to use up those little bits of colorful HTV you may save (like me), sure that you will find something to use them on! 

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY Hand Dyed Baby Onesies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

In honor of my sister’s first child, we are adding Baby Shower Gifts to the Wine and Sprinkles DIY arsenal! :) When I was thinking of baby shower gifts the first thing that came to mind was all the fun HTV decals I could make for onesies! But since white onesies weren’t quite colorful enough for me, I decided to dye them first!

 If you are looking to make some onesies for a special mama's little one, I would highly recommend dying them some fun colors beforehand! It's a super easy project that is a couple hours of time of letting clothes sit in dyes and wash in the washing machines for super fun colored onesies!

Since I wanted to dye multiple colors all at the same time, I bought a multipack of these 16 qt Sterilite Containers and it worked out so well! I was able to dye all my onesies at the same time and, for a couple hours or work, made dozens of onesies in a rainbow of colors for my nephew!

---

Supplies:

- White Onesies
- Cotton Color Dye
- Salt (½ cup per color)
- Dish Detergent
- Plastic Gloves
- Sterilite Plastic Containers or Stainless Steel Sink

---

1. Start by washing and drying all the onesies you want to dye to remove any starches or detergents currently in the fabric. Put on gloves to start preparing the dye baths.

2. Now, prep the dye bath for your onesies in a sink or plastic container. For each color you want to dye your onesies, you will need a separate bath. For each color bath, make a dye mixture consisting of:

1 gallon Hot (140-160° F) Water
½ cup salt
4 - 6 oz Clothing dye
½ tsp Liquid Dish Detergent 

For the colors I made, I used the following combinations of dyes:
Red- 6 oz. Cherry Red
Orange - 4 oz. Lemon Yellow + 1 oz. Cherry Red
Yellow - 4 oz. Lemon Yellow
Emerald - 4 oz. Emerald
Blue/Green - 4 oz. Emerald + 2 oz. Denim Blue (I’d recommend 1 oz)
Blue - 4 oz. Denim Blue
 If you are using a dye other than the ones I used, make sure to check the instructions on their dye mix ratios!

3. Once the bath is made, add your onesies to the dye mixture, completely submerging and soaking each individually as you add it. Once all the clothes are added, stir the dye-onesie mix and cover with the container lid (if you are using containers like me).  I made 4-5 onesies in each color.

4. Let the onesies soak for one hour, stirring every few minutes to mix the dye with the onesies. I ended up not stirring them, but I should have! Mine came out a little marbley, which I thought was super fun but if you are looking for a more consistent color, stirring often is key! :) I also let the Yellow and Orange Onesies soak for an extra 30 minutes because they were a lighter color and I wanted to make sure it got dyed all the way!

Now what do you do when you are done dying your onesies? Add some super cute HTV decals to personalize them for a perfect handmade baby shower gift! You can check out our Baby Onesie Projects Here for lots of different design options to perfectly customize your gift to delight your mama to be!

5. After the onesies are dyed to your desired shade, remove them from the bath and wash them in the sink under cold water until the water begins to run clear. Then, wash them on warm with a mild detergent and an old towel in a washer; dry, and you’re done! I ended up washing and drying each color of onesies individually, to make sure the colors didn’t run.

Romantic Font DIY Bridal Party Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

While they are most commonly used for Bachelorette Party Favors, fun flasks like these are great gifts to give to your Bridesmaids as part of a Bridesmaid Proposal or Bridesmaid Gift too!

I made my decals in Oracal 651 Turquoise Permanent Adhesive Vinyl, and while its a pretty choice, I feel like darker colored vinyl (or a different colored flask) would make it even better! This is a great project to start with if you haven’t done much vinyl transfer, the slightly curved surface is still easy to transfer to and this girly delicate font is the perfect way to class up a standard flask!

For those of you that may want to create more personalized designs,  I used the font Clarissa for the decals, which you can download for free at dafont.com.

---

Supplies:
Flasks
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat

Flask Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning the decals as shown in the photos. The flasks are 3.5" x 4.5" so arrange the decals based on where you want it on the flask.  Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Now, transfer the design to your flask. Remove the transfer tape from the vinyl backing, transferring the vinyl design to the transfer tape.

5. Align the design on the flask along the top edge of the flask . Smooth the design onto the flask, once again using the smoother to remove any air bubbles.

6. Remove the transfer tape to leave the design on the flask, then repeat the process for all the additional flasks.