This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here
While they are most commonly used for Bachelorette Party Favors, fun flasks like these are great gifts to give to your Bridesmaids as part of a Bridesmaid Proposal or Bridesmaid Gift too!
I made my decals in Oracal 651 Turquoise Permanent Adhesive Vinyl, and while its a pretty choice, I feel like darker colored vinyl (or a different colored flask) would make it even better! This is a great project to start with if you haven’t done much vinyl transfer, the slightly curved surface is still easy to transfer to and this girly delicate font is the perfect way to class up a standard flask!
For those of you that may want to create more personalized designs, I used the font Clarissa for the decals, which you can download for free at dafont.com.
Supplies:
Flasks
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Flask Design Cut File
After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.
Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos.
3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning the decals as shown in the photos. The flasks are 3.5" x 4.5" so arrange the decals based on where you want it on the flask. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.
4. Now, transfer the design to your flask. Remove the transfer tape from the vinyl backing, transferring the vinyl design to the transfer tape.
5. Align the design on the flask along the top edge of the flask . Smooth the design onto the flask, once again using the smoother to remove any air bubbles.
6. Remove the transfer tape to leave the design on the flask, then repeat the process for all the additional flasks.
