DIY HTV Brand Spankin New Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

There are so many cute designs and sayings to make for onesies, I had to include this adorable Brand Spankin’ New onesie in my decal collection! This two toned onesie is a super fun and easy choice to gift to any “Brand Spankin” New Born you know!

I made the decal in Tiffany Blue Easyweed HTV and Silver Glitter HTV on a Hand Dyed Emerald Onesie and it came out adorable! The fonts used were Bebas Kai and Passenger Script, in case you want to use them to design your own projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie, shiny side up.. Start by arranging the whole design (both colors) so that you can see how they will fit together, with the “Spankin” Decal under the other text decal. Once the design is placed to your satisfaction, remove the “Brand - New” lettering, leaving only the “Spankin” Decal to transfer first.  Cover with parchment paper, making sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Now, arrange the second decal back on the onesie, sandwiching the “Spankin” decal between “Brand” and “New.” Cover with parchment paper and again press the design for at least 20-30 seconds.

6. Remove the parchment paper and peel the clear backing from the decal, leaving the end of the design on the onesie.

I paired this onesie with our Hello World Onesie for a fun blue and green onesie combo, which would you pick? I love pairing onesies together or creating sets, so try pairing this with any of our other Onesie Designs to make a handmade and heartfelt gift for any newborn in your life!

DIY HTV New to the Crew Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

My sister’s favorite halloween costume is being a pirate, so much so she's done it for the last several years! So her baby can join the fun, I designed this “New to the Crew” Onesie to celebrate her newest crew member! Regardless of your seafaring ways, this onesie is an adorable choice to add to any newborn ensemble!

In keeping with our pirate theme, I made the decal from Gold Metal Foil HTV on a Hand Dyed Red Onesie, perfect for a tiny future pirate! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press.

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat
Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for 10-15 seconds for the Metal HTV or at least 20-30 seconds for Easyweed or Glitter HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Adventure Awaits Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

As any mother can attest, when you have your first baby you are quite literally setting off into a new life adventure! And no better way to bedeck a new baby than in this Adventure Awaits HTV Onesie! I went with a nautical theme on this onesie, complete with a little sailboat to set sail for the new adventures of mom and baby!

I made the decal in Tiffany Blue Easyweed Heat Transfer Vinyl on a Hand Dyed Blue Green Onesie and it turned out great! If you are looking to use this font for other projects, I used Bio Monster, a font that is free to use from dafont.com.

This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press! Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Hello World Newborn Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I had so much fun designing all sorts of onesies for my sister’s new baby, so we are starting our onesie designs of the year with a very appropriate newborn onesie that literally tells the world hello! :) This Hello World Onesie is a perfect choice for any newborn ensemble and is a beautiful handmade gift for any mama to be! 

I made the decal in Yellow Easyweed Heat Transfer Vinyl on a Hand Dyed Denim Onesie and I absolutely adore the color combination! This project is a great beginner HTV transfer project; the decal is easy to cut, weed, and small enough to fit entirely under your iron in one press. It's also a means to use up those little bits of colorful HTV you may save (like me), sure that you will find something to use them on! 

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat
Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY Hand Dyed Baby Onesies

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

In honor of my sister’s first child, we are adding Baby Shower Gifts to the Wine and Sprinkles DIY arsenal! :) When I was thinking of baby shower gifts the first thing that came to mind was all the fun HTV decals I could make for onesies! But since white onesies weren’t quite colorful enough for me, I decided to dye them first!

 If you are looking to make some onesies for a special mama's little one, I would highly recommend dying them some fun colors beforehand! It's a super easy project that is a couple hours of time of letting clothes sit in dyes and wash in the washing machines for super fun colored onesies!

Since I wanted to dye multiple colors all at the same time, I bought a multipack of these 16 qt Sterilite Containers and it worked out so well! I was able to dye all my onesies at the same time and, for a couple hours or work, made dozens of onesies in a rainbow of colors for my nephew!

---

Supplies:

- White Onesies
- Cotton Color Dye
- Salt (½ cup per color)
- Dish Detergent
- Plastic Gloves
- Sterilite Plastic Containers or Stainless Steel Sink

---

1. Start by washing and drying all the onesies you want to dye to remove any starches or detergents currently in the fabric. Put on gloves to start preparing the dye baths.

2. Now, prep the dye bath for your onesies in a sink or plastic container. For each color you want to dye your onesies, you will need a separate bath. For each color bath, make a dye mixture consisting of:

1 gallon Hot (140-160° F) Water
½ cup salt
4 - 6 oz Clothing dye
½ tsp Liquid Dish Detergent 

For the colors I made, I used the following combinations of dyes:
Red- 6 oz. Cherry Red
Orange - 4 oz. Lemon Yellow + 1 oz. Cherry Red
Yellow - 4 oz. Lemon Yellow
Emerald - 4 oz. Emerald
Blue/Green - 4 oz. Emerald + 2 oz. Denim Blue (I’d recommend 1 oz)
Blue - 4 oz. Denim Blue
 If you are using a dye other than the ones I used, make sure to check the instructions on their dye mix ratios!

3. Once the bath is made, add your onesies to the dye mixture, completely submerging and soaking each individually as you add it. Once all the clothes are added, stir the dye-onesie mix and cover with the container lid (if you are using containers like me).  I made 4-5 onesies in each color.

4. Let the onesies soak for one hour, stirring every few minutes to mix the dye with the onesies. I ended up not stirring them, but I should have! Mine came out a little marbley, which I thought was super fun but if you are looking for a more consistent color, stirring often is key! :) I also let the Yellow and Orange Onesies soak for an extra 30 minutes because they were a lighter color and I wanted to make sure it got dyed all the way!

Now what do you do when you are done dying your onesies? Add some super cute HTV decals to personalize them for a perfect handmade baby shower gift! You can check out our Baby Onesie Projects Here for lots of different design options to perfectly customize your gift to delight your mama to be!

5. After the onesies are dyed to your desired shade, remove them from the bath and wash them in the sink under cold water until the water begins to run clear. Then, wash them on warm with a mild detergent and an old towel in a washer; dry, and you’re done! I ended up washing and drying each color of onesies individually, to make sure the colors didn’t run.

Romantic Font DIY Bridal Party Flasks

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

While they are most commonly used for Bachelorette Party Favors, fun flasks like these are great gifts to give to your Bridesmaids as part of a Bridesmaid Proposal or Bridesmaid Gift too!

I made my decals in Oracal 651 Turquoise Permanent Adhesive Vinyl, and while its a pretty choice, I feel like darker colored vinyl (or a different colored flask) would make it even better! This is a great project to start with if you haven’t done much vinyl transfer, the slightly curved surface is still easy to transfer to and this girly delicate font is the perfect way to class up a standard flask!

For those of you that may want to create more personalized designs,  I used the font Clarissa for the decals, which you can download for free at dafont.com.

---

Supplies:
Flasks
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat

Flask Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.5" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning the decals as shown in the photos. The flasks are 3.5" x 4.5" so arrange the decals based on where you want it on the flask.  Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Now, transfer the design to your flask. Remove the transfer tape from the vinyl backing, transferring the vinyl design to the transfer tape.

5. Align the design on the flask along the top edge of the flask . Smooth the design onto the flask, once again using the smoother to remove any air bubbles.

6. Remove the transfer tape to leave the design on the flask, then repeat the process for all the additional flasks.

Bride and Squad DIY Toasting Flutes

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

To join our Bride and Tribe Flutes in the Bridesmaid Proposal Glassware Projects, their cousin the Bride and Squad Flutes! Champagne Flutes are a great choice for Bachelorette Parties, as well as for Bridesmaid Proposals or holding getting ready drinks the morning of your wedding!

I made my bride flute in Silver Glitter Permanent Adhesive Vinyl, and the squad flutes in Oracal 651 Purple Permanent Adhesive Vinyl, and the colors turned out perfect! But you could easily make dozens of different combinations to perfectly match your wedding or bachelorette colors. This is also a great project to start with if you haven’t done much vinyl transfer on curved surfaces before, the decal is easy to weed and the stemless flutes are much easier to align and transfer to than wine glasses.

For those of you that may want to create more personalized designs,  I used the font Passengers Script for the Bride and Squad Decals, which you can download for free at dafont.com.

---

Supplies:

Stemless Champagne Flutes
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set

Flute Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size to whatever you like. 

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design. Align the “squad” decals with one of the 0.5” blocks of the transfer tape to the left of the decal and one block along the bottom of the letters “uad.” Align the “bride” decal with two blocks to the left of the decal,  and one block along the bottom of the “id.” This will make it easier to place it properly on the glasses later.

4. After smoothing the transfer tape of the designs with the smoother tool, remove the transfer tape from the backing, lifting the design with the transfer tape.

5. Using the transfer tape as a spacer, smooth the design onto the flutes, aligning the short side of the transfer tape along the top edge of the glasses. I adhered mine as shown below, with the tape parallel to the top of the glass just under the rim.

6. Once the transfer tape is aligned along the top, smooth it onto the glass from top to bottom. I smoothed mine by tracing the letters from top to bottom until the entire design was smoothed onto the flute.

7. Once the design has been smoothed and all air bubbles are removed, remove the transfer tape to leave the design on the flute. Repeat the process for all the remaining flutes.

Bride Squad DIY Skinny Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

For those of you that may want to create more personalized designs,  I used the font Passengers Script for the Bride and Bride Squad Decals, which you can download for free at dafont.com.

Skinny Tumblers are a great choice for  Bridesmaid Proposals, Bridesmaid Gifts, Bachelorette Party Favors, or getting ready drinks the morning of your wedding. Since they are also a great choice for crafty brides to DIY, we’ve made multiple Tumbler Designs for you to choose from! Up today are some bride squad skinny tumblers, Perfect for including in a bridesmaid box or for sipping bachelorette cocktails at the pool.

These decals are easy to weed and good project for beginners working on curved surfaces. While the tumblers are a curved surface, the cylindrical shape makes the transfer pretty easy. The bride decal was cut is Oracal 651 Gold Permanent Adhesive Vinyl with the bride squad cut in Glitter SeaFoam Green, which may be one of my new favorite color combinations!

---

Supplies:
Skinny Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set

Skinny Tumbler Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3" x 7.5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it with the text and arranging it such that one set of the 1/2” blocks are along the left of the decal, as shown in the photos. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Now, transfer the design to your tumbler. Remove the tape and decal from the backing, making sure that the entire decal transfers to the transfer tape.

5. Arrange the design such that the short side of the transfer tape is along to top edge of the lip of the tumbler, as shown in the photos. Starting from the top and working down, trace the letters to smooth them onto the tumbler. Smooth the design to remove any air bubbles,. Remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Use the smoother tool or your finger to retrace the letters after removing the transfer tape to smooth out any additional air bubbles. Repeat with the remaining tumblers.

I Do Crew DIY Bridal Party Wine Glasses

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I always seem to get enamored with different little phrases to describe your bridal party, and this year was no different. Once I heard the phrase “I Do Crew,” I wanted (and succeeded) to put it on everything bridesmaid! So the first in a selection of the I Do Crew Projects coming out this year, I started with the perfect choice for a bridesmaid proposal, a wine glass! Wine glasses are a super cute way to invite your maids and are a particular favorite of mine because they are so easy to package into cute little boxes!

I made the decals in Glitter Seafoam Green Permanent Adhesive Vinyl, and I love how they turned out! Wine Glasses can be a little tricky to transfer to, so cut a couple extra decals and take your time with the transfer, starting in the middle of the design and working outward, once you get the hang of it it’s not too tricky!

For those of you that may want to create more personalized designs,  I used the font Bebas Kai for the “I Do” and the font Rachella Script for the “crew” lettering on the Decals, which you can download for free at dafont.com.

---

Supplies:
Wine Glasses
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set

Wine Glass Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit another sized glass than the ones we recommend.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 3.25" x 3". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning the bottom of the first set of blocks along the top of the text, as shown. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Remove the transfer tape, making sure that the whole of the design transfers from the vinyl backing to the transfer tape.

5. Now, transfer the design to your glass. Arrange the decal on about the middle of the glass, then smooth the design around the curve of the glass from the middle of the design to the edges. Smooth any air bubbles out of the vinyl, but don’t worry about the crinkling of the transfer tape with the curved surface.

6. Remove the transfer tape to leave the design on the glass. Any additional bubbles in the design can now be smoothed out with either your fingers or the smoother tool. Repeat the process with all remaining wine glasses.

Arrow Decal DIY Bridal Party Skinny Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Bridal Party tumblers are always a great choice for Bridesmaid Proposals, Gifts, or as Bachelorette Party Favors, so we had to add to our collection of decals! Since we are starting the year with some fun projects to invite your bridal party to the wedding fun, our first tumbler project of the year are these Bridal Party Arrow Decal Tumblers.

The whimsical arrow decals are easy to weed and a great project for beginners. While the tumblers are a curved surface, the cylindrical shape makes the transfer far easier than wine glasses. The bride decal was cut is Silver Glitter Permanent Adhesive Vinyl, complemented by the maid of honor and bridesmaids tumblers in Lilac and Purple Permanent Adhesive Vinyl.

For those of you that may want to create more personalized designs,  I used the font Bio Monster for the lettering in the arrow decals, which you can download for free at dafont.com.

---

Supplies:

Skinny Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Skinny Tumbler Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2.5" x 7.5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it with the text and arranging it such that one set of the 1/2” blocks are to the left of the end of the arrow, with the decal horizontally aligned along the bottom of the text. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

4. Now, transfer the design to your tumbler. Remove the tape and decal from the backing, making sure that the entire decal transfers to the transfer tape.

5. Arrange the design such that the short side of the transfer tape is along to top edge of the lip of the tumbler, as shown. Starting from the top and working down, trace the letters to smooth them onto the tumbler. Smooth the design to remove any air bubbles,. Remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Use the smoother tool or your finger to retrace the letters after removing the transfer tape to smooth out any additional air bubbles. Repeat with all remaining tumblers.

DIY Bride and Tribe Bridal Party Champagne Flutes

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

There's no better way to celebrate the New Year, and hopefully a New Years or Christmas Proposal, than a toast is some fun glittery DIY champagne flutes. These Bride and Tribe stemless flutes are a great choice for Bridesmaid Proposals, Gifts, or as Bachelorette Party Favors!

I made my bride flute in Oracal 651 White Permanent Adhesive Vinyl, and since I couldn’t decide between the Glitter Seafoam Green and the Glitter Rose Gold Vinyl, I ended up making Tribe decals in both colors! You may even see magically, some may say accidentally, that the flute switches colors part way through the tutorial!

This is also a great project to start with if you haven’t done much vinyl transfer on curved surfaces before, the decal is easy to weed and the stemless flutes are much easier to align and transfer to than wine glasses.

For those of you that may want to create more personalized designs,  I used the font Breamcatcher for the Bride and Tribe Decals, which you can download for free at dafont.com.

---

Supplies:

Stemless Champagne Flutes
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set

Flute Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size to whatever you like.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it to along the first letter of the designs  with the bottom lines of the tape aligning to the text as shown above. Make sure to align it such that 1” of the transfer tape is to the left of the first letter to use in placing it properly on the glasses later.

4. After smoothing the transfer tape of the design with the smoother tool, remove the transfer tape from the backing, lifting the design from the backing with the transfer tape.

5. Using the transfer tape as a spacer, smooth the design onto the flutes, aligning the short side of the transfer tape along the top edge of the glasses. I adhered mine as shown to the right. with the tape parallel to the top of the glass just under the rim.

6. Once the transfer tape is aligned along the top, smooth it onto the glass from top to bottom. I smoothed mine by tracing the letters from top to bottom until the entire design was smoothed onto the flute,as shown to the left.

7. Once the design has been smoothed and all air bubbles are removed, remove the transfer tape to leave the design on the flute. Repeat the process for all the remaining flutes.