DIY HTV Never Grow Up Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

If there is a universal truth among mothers, it's that babies grow up too darn fast! While I can’t decide if I like it most because it reminds me of Peter Pan and his motto, or that little one’s time as babies is too short, this Never Grow Up Onesie catches my feelings perfectly!

I used Black Easyweed HTV for the decal on a Orange Hand Dyed Onesie and it turned out beautifully, but you could try literally any combination of onesie and HTV for the simple modern decal! While the lettering is thin, I had no issues with cutting or weeding this design, making it great for both beginners and those experienced with HTV transfer projects. I used the fonts Geo Sans Light and Clarissa for the design, which are both free to download at dafont.com to customize your onesie further or to include in your other crafting projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV “I Like Big Trucks” Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

While we just sold our truck, trucks certainly hold a special place in my husband and I’s heart as it was our primary mode of transportation and pulling our trailer/house for a year of USA travelling! So when I was designing onesies, the first time I saw the phrase “I like big Trucks and I cannot Lie” I knew I HAD to make one, not only as a fun punny construction themed onesie but because we love big trucks!

I used Royal Blue HTV on an Orange Hand Dyed Onesie for this design and it was perfect for a construction themed onesie! The lettering is a mix of two fonts, Bebas Kai and The Bold Font, which are both free to download at dafont.com for all your crafting needs!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Lil’ Peanut Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Today we are finishing up the Zoo themed onesies with another of my favorite animals, elephants! Since I love calling little ones little peanuts, this Lil’ Peanut onesie was the perfect combination of cute, punny, and safari!

The decal was cut from Turquoise Easyweed HTV for a Yellow Hand Dyed Onesie, and I think the color combination is perfect for an elephant safari style onesie, but I would love to try it in a with lavender HTV on dark pink onesie for a little girl!  I used the font Kenyan Coffee for the decal which is free to download at dafont.com to further personalize your onesie or other DIY baby projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with our Wild One Onesie for a fun zoo themed two pack!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Man Cub Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

There are so many fun animal themed onesies that it was hard to decide who to include for our safari themed set! But as soon as I saw my first among many Man Cub onesies, I had to design one for my own collection! While this onesie works great with any of our safari themed onesies, I also love the idea of pairing this onesie with the Baby Bear Onesie for a fun forestry bear cub themed gift!

I made the decal with Black Easyweed HTV on a Hand Dyed Red Onesie and it turned out adorable! Similar to the Wild Child Onesie, I used the font African in this design but paired it with Breamcatcher for a fun safari feel! You can download these fonts for free at dafont.com to use for further personalization or to use in your other DIY projects.

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with our Wild Child Onesie for a cute safari themed set for any new mother and baby

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Wild One Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When I was little, and even now, I absolutely adored zoos and all sorts of animals. So as I started brainstorming different onesie ideas, it's no surprise that there were a couple safari themed ones in the mix! We’ve already featured our cute, lion inspired Wild Child Onesie, but I couldn’t resist also making a Wild One onesie too! This onesie is also perfect for a little one’s first birthday, especially at the zoo!

Like our New to the Crew Onesie and our Dino Footprint Pattern Onesie, I made the decal in Gold Metal Foil HTV on a Red Hand Dyed Onesie and the color combination was perfect! I used the font Breamcatcher for this design, which is free to download at dafont.com to continue to personalize your onesie, or for other DIY projects you want to create!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for 10-15 seconds for the Metal HTV or at least 20-30 seconds for Easyweed or Glitter HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV “Rawr means I Love You in Dinosaur” Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I remember I first heard the fun phrase, “RAWR means I love you in Dinosaur” years ago and thought it was the cutest thing ever! At that time, it was for fun with my now husband, but I also adore it as a baby saying, especially since sometimes it feels like baby sounds are kind of like a dinosaur rawr. :) Similar to the A-roar-able Baby Onesie, this onesie also comes with a cute little longneck dinosaur decal for your favorite little milk-a-voire!

I cut the decal in Jade Glitter HTV and transferred it to a Denim Hand Dyed Onesie, and while it still turned out cute next time I think I’ll try it on a lighter colored onesie for contrast, but I can’t say no to the fun Glitter HTV’s one onesies and the jade is great for dinosaurs!I used the font The Bold Font when I designed this decal, which is free to download from dafont.com for further customization or to use in any of your other baby projects.

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with our Aroarable Dino Onesie for an adorable Dino Onesie Duo!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV “Velocinaptor” Dinosaur Themed Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

For the end of our Dinosaur themed decals, I had to have an ode to my favorite dino, the Velociraptor! And then once I heard the adorably punny “Veloci-nap-tor,” I knew I had to make one for my sister’s baby. I had so much fun drawing the little raptor with a bottle, it may be my favorite of all the dino onesies!

The decal is made of Purple Easyweed HTV on an Orange Hand Dyed Onesie and it came out so cute! I used the font Breamcatcher in this design, a font that is free to download from dafont.com to use to personalize this onesie or for your other crafting projects! 

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:

Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with our Dino Footprints Baby Onesie of any of our other Dino Onesies for a perfect pair to give any new dino loving mama and baby!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Dino Footprints Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When I was designing all my Critter themed onesies, I adored the Paw Print Patterned Baby Onesie because it was perfect to pair with any of the other onesie designs, making it a great for lots of critter themed baby gift sets. So upon designing a bunch of dino themed onesies I had to include a dinosaur footprint design too!

This decal was cut in Gold Metal Foil HTV for a Red Hand Dyed Baby Onesie and I adore the color combination, not only for this onesie, but for any onesie design in general! I’ve used it on our New to the Crew Onesie as well as on projects coming soon and I never get tired of it! :)  

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then arrange the decals on the onesie for transfer. I arranged my decal for under the left arm to the neckline, as shown in the photos, but you could also add one to the right side like our Paw Print Patterned Onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for 10-15 seconds for the Metal HTV or at least 20-30 seconds for Easyweed or Glitter HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV A-Roar-able Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Dinosaurs are easily one of my favorite baby themes, especially because there are so many cute, punny, sayings I see on dino themed baby onesies! The very first one I designed was this A-roar-able onesie, complete with, as Little Foot would say, a cute little Longneck dinosaur decal.

I made the decal with Tiffany Blue Easyweed HTV on an Emerald Hand Dyed Onesie and the color combination is amazing! I love the contrast of the light decal on the darker onesie and the green shades in them both are perfect for any little dino loving baby or parents! I used the font Bebas Kai in the design, which is free to download on dafont.com for additional customization on this onesie or any other baby projects you can think of!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

Bath Time Essentials Baby Gift Bento Box

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

One of my favorite gifts to bring to baby showers are baby bath time supplies, in fact the first baby shower gift I ever bought was a set of baby towels, washcloths and bath supplies that I made a gift basket for in an inflatable baby tub. So when I first started thinking of fun ways to package and give baby gifts, a bathtime essentials gift box was a must!

Complete with Hooded Towels, Washcloths, and a Bath Temperature Safety Duck; this Bento Box comes with starter products every baby bath needs and is an adorable way to present all the goodies to an expecting mama. And as every baby needs them, you will likely be purchasing much needed items already on their registry!

For these and other Baby Gift Box Bentos, I used a 10 inch square box to house our gifts and it was the perfect size for this Bath time Bento! While you can use other sizes of boxes for this project, you will have to play around a little with the towel folding to make them fit just right, though the washcloths can squeeze into a smaller box more easily.

These boxes are also great as mailable presents for if you cannot visit your mama to be but still want to send a personal and thoughtful gift. Regardless of if you are mailing or giving in person, I encourage you to stuff the top of your box with tissue paper so that items don’t move around while shipping or wrapping, plus it makes it a fun presentation removing the tissue paper to a lovely organized baby gift!

---

Supplies:

- Hooded Towel 3 Pack
- Baby Washcloth 10 Pack
- Safety Duck
- Square Gift Box

- Tissue Paper (Optional)

---

PART 1: FOLDING TOWELS

When I first received my towels in the mail, they were already rolled into clever little bundles like these and could be easily arranged in a gift box without unfolding. In case yours are not, here is the method I used for folding towels for the bath time bento box!

1. Start with your hooded towel unfolded, with the hood facing away from you to the lower right. Using your gift box as a guide, fold the towel lengthwise in thirds, starting with the non-hooded side first, then folding over the hood to make a long rectangle. The rectangle should have the width of the box you are using, which may require the second fold of your towel to “overlap” the first fold, but the important thing is the width! Once folded, flip over the towel so that the hood side is down and closest to you, as shown in the next set of photos.

2. Starting with the non-hood side, fold your long rectangle in thirds again, this time width-wise. After the first fold, bring the hooded side up to the opposite edge to form a squarish packet with the patterned hood displayed as shown in the photos above.

3. Flip the towel over again, with the folded edge towards you. You will see a bit of the hood peeking out from the lower left corner and all the open edges of the towel will be on the opposite side. Once again, fold your towel in thirds as shown in the photos, starting with the folded edge, essentially rolling it into a rectangular tube,with the patterned hood completely showing on one side and the hood with a white triangle showing on the other side. Repeat the process with the other two towels.

4. Now the towels can be placed in the gift box! Starting on the left side of the box and holding each towel as you add another, place each towel in the box; with the open seam of the hood towards the bottom, as shown below. Holding the towels in the box to the left, secure their placement by inserting the rubber duck into the right side. This will keep the towels secure and folded while you fold the washcloths!

---

PART 2: FOLDING WASHCLOTHS

1. To fold the washcloths, start with the washcloth unfolded with the tag facing up. Start by folding the right side of the washcloth over so that the tag of the washcloth is nestled against the fold, as shown in the photos. Then, using the gift box as a guide, fold over the other side of the washcloth so that it forms a long rectangle that is the width of the open area behind the rubber duck.

2. Now, fold the washcloth rectangle in thirds width-wise to create a small folded packet as shown below. Repeat this folding with all the remaining washcloths then put the washcloths into a stack, with all the folded, pretty, sides together and the open ends towards the back. I stacked mine so that the solid and patterns alternated between the three options and would highly recommend it!
   

3. Grabbing the entire stack with one hand, with the pretty side of the stack towards you, place it into the gift box above the rubber duck, pressing them in gently as needed to fill the space and show off their patterns.  Top your creation with extra tissue paper if you wish and put on the top of your box. Your bento is now folded, assembled and ready to gift!

DIY HTV Future Pirate Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

A super cute trend that I adore for baby onesies are ones where the parents encourage their little ones with hopes of the future, or at least jokingly give them future professions based on the parents interest. Since my sister loves pirates I decided, instead of a Future Princess or other more common choice, to design her baby a Future Pirate Onesie!

This decal was made with Gold Metal Foil HTV on a Hand Dyed Red Onesie, and I just adore the color combination for a piratey onesie!  Similar to the Pirate Life Onesie and Daddy’s First Mate Onesie, I used Antique Book Cover as one of my design fonts, this time pairing it with a super fun pirate font called Freebooter Script and I love how it turned out! Both of these fonts are free to download on dafont.com for any of your pirate themed projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift and Onesie Inspiration!

---

Supplies:
Dyed or White Onesies
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for 10-15 seconds for the Metal HTV or at least 20-30 seconds for Easyweed or Glitter HTV, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with our adorable Daddy’s First Mate Onesie for the perfect pirate two pack!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Daddy’s First Mate Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

It's always fun to include daddy’s in the baby onesie fun, so for the next onesie in our Pirate Themed Onesie Set is the perfect choice for a pirate papa, the Daddy’s First Mate Onesie! 

This decal was cut in Black Easyweed HTV for a Yellow Hand Dyed Onesie and the color combo was a perfect fit for the pirate theme! I used the fonts Passengers Script and Antique Book Cover while designing this decal, which are both free to download from dafont.com to use in customizing these onesies or any other Baby Projects you can think of!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift and Onesie Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2.  After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie.

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

DIY HTV Pirate Life Baby Onesie

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

I love theming onesies for new parents, so when my sister was having her baby I had to include some pirate themed onesies, especially because she lives on an island and has dressed as a pirate for Halloween for several years! So her new little one can join in her fun, I made a whole set of pirate onesies in different sizes. First was our newborn New to the Crew Onesie, and now we are adding to the collection with this adorable Pirate Life Onesie!

I made the decal with Black Easyweed HTV on a Emerald Hand Dyed Baby Onesie and I love the way it turned out! I used the font Antique Book Cover for this decal, which you can download for free at dafont.com to use in customizing this onesie further or for any seafaring baby projects!

Make sure to check out our other Baby Onesie Projects for more DIY Baby Shower Gift and Onesie Inspiration!

---

Supplies:
Dyed or White Onesies
Easyweed Heat Transfer Vinyl or Glitter Heat Transfer Vinyl
Craft Cutter and Tool Set
Adhesive Mat

Onesie Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit your onesies the way you like.

2. After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed HTV) or Iron On+ (for Glitter HTV) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.Iron your onesie to remove any creases, then center the design over the top half of the onesie. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

4. Set your Iron to the second Highest setting. Cover the parchment paper and decal with your iron, pressing down firmly on the design. Using your iron like a small heat press, press the design for at least 20-30 seconds, repeating and overlapping the last position as you move across the design. Luckily, onesie decals are so small, you should be able to fit the whole decal under the iron in a single press!

5. Remove the parchment paper and peel the clear  backing from the decal, leaving the design on the onesie. Pair this design with any of our pirate themed onesies, but one of my favorites is the New to the Crew Onesie!

Check out our other Baby Onesie Projects for more DIY Baby Shower Gift Inspiration!

Romantic Font DIY Bridal Party Shirts

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

Some of my favorite DIY projects are for getting ready with your best girls on the morning of your wedding! To deck out you ladies in matching tank tops or t-shirts for getting ready, these beautiful romantic font wedding title bridal party t-shirts are a wonderful choice! I made these ones at wedding ready t-shirts, but they would also be great as bridesmaids proposals too!

I include decals for the bride, bridesmaids, maid and matron of honor, as well as mother of the bride and groom; so the whole group can join in the getting ready wedding fun! I used the font Clarissa when designing these decals and you can download it for free at dafont.com to use in further personalizing these t-shirts or in any other wedding projects you like!

I made the bride decal in Mermaid Blue Glitter HTV, the bridesmaids and MOH decals in Gold Foil HTV, and the mother of the bride and groom's in Mermaid Blue Glitter HTV, but these colors could be easily customized to any wedding color theme you like when there are so many different HTV color choices to choose from!

 You can check out more of our HTV Tank Top and Tshirt Projects Here, so you will be able to DIY the perfect set for all the special ladies in your life!

---

Supplies:
Blank TShirts
Metal Look HTV, Easyweed HTV or Glitter HTV
Craft Cutter and Tool Set
Adhesive Mat

TShirt Design Cut Files

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so to fit the shirts the way you like.

2.  After selecting “Make It” Make sure to select the Mirror Mode on the cutting screen. Cut the design in your choice of heat transfer vinyl with the Iron On (for Easyweed Vinyl) or Iron On+ (for Glitter Vinyl) Setting on your Cricut, with the shiny side of the material down.

3. Weed the additional material off of the backing material so that, looking down with the shiny side up, you can see your design with the correct orientation.

4. Iron your tshirt or tank top to remove any creases, then center the design over the top half of the tank top. Arrange the design shiny side up, then cover with parchment paper. Make sure to keep the parchment paper between the design and the iron.

5. Set your Iron to the second Highest setting and press the iron down firmly on the design, not ironing but rather using it as a small heat press. I worked from the upper left to lower right on the design, pressing the iron on each part of the design for at least 20-30 seconds, then overlapping the last position as you move the iron across the design.

6. Remove the backing from the design, leaving the design on the fabric. Repeat with all remaining tshirts.

You can find more designs for your bridal party in our Tank Top and TShirt Projects! :)

DIY I Do Crew Skinny Tumblers

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

When I was designing Bridesmaids Tumblers, I had to include my new favorite bridal party group saying, the I Do Crew! I love this saying and it's perfect not only for Bridesmaids Proposals and Gifts, but also for your whole bridal party group to use for getting ready or dress shopping! 

 I made the decals with Oracal 651 Turquoise Vinyl and they were beautiful on the Clear Acrylic Tumblers, but I would love to see what the Gold Metalized Vinyl would look like on a Black, White or Marbled Tumbler for a bachelorette party! I used the fonts Bebas Kai for “I Do” and Rachella for “Crew” if you would like to use these phones to further personalize tumblers they are available for free at dafont.com

You can see more of our Tumbler Decal Designs Here for other choices to perfectly fit your taste and that you can DIY for your girls!

---

Supplies:
Skinny Tumblers
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set

Skinny Tumbler Design Cut File

---

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file, then select Save.

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can.

4. Now, transfer the design to your tumbler. Remove the tape and decal from the backing, making sure that the entire decal transfers to the transfer tape.

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer tape to 2.5" x 7.5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it with the text and arranging it such that one set of the 1/2” blocks are along the left of the decal, as shown in the photos. Using the smoother tool, smooth the tape over the vinyl, removing any air bubbles.

5. Arrange the design such that the short side of the transfer tape is along the top edge of the lip of the tumbler, as shown in the photos. Starting from the top and working down, trace the letters to smooth them onto the tumbler. Smooth the design to remove any air bubbles. Remove the transfer tape from the tumbler, leaving the design on the tumbler.

6. Use the smoother tool or your finger to retrace the letters after removing the transfer tape to smooth out any additional air bubbles. Repeat with the remaining tumblers.