Ombre Watercolor Wedding Signs

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

These wedding signs may be my favorite thing I’ve made in September for my two brides, and funnily enough they were the thing that was made “in a hurry.” I had finished the other crafts, gotten all my candle holders and decorations together, and my friend/bride asked if I had any ideas for a “Pick a Seat, not a Side” signs.

I considered staining wood and using vinyl for lettering since it was an outdoor wedding, but I only had 3 days before the wedding and wasn’t about to get that done in time. Then I saw my pile of blank canvases (come now we all have one, those darn Michaels sales!) and saw a great opportunity to use them!

I used removable vinyl for the lettering and would highly recommend you doing so if you don’t plan to keep these forever. They held up just fine outside and even when it rained, but the vinyl being removable made it much easier to move the lettering if you don’t position it just right the first time.

When we had first started thinking about her wedding, there were so many ombre details we saw on Pinterest that we loved so I figured, why not ombre these signs? I absolutely love how they came out and, other than making sure my letters were all looking nice, easy to make and only took a couple hours! And by a couple hours, that was half an hour of doing things and a couple hours of letting paint dry.

Supplies:
Craft Cutter and Tool Set
Adhesive Mat
Transfer Paper
White Adhesive Vinyl
Purple, Lavender, and White Paint
16” x 20” Canvases
Paint Brush
Bowls for Paint
Pick a Seat Cut File
Not a Side Cut File
You’re Loved by both Cut File
The Groom and Bride Cut File

1.     First, mix your different colors of paint. I used a mix of white, lavender, and violet to make 4 different shades. Add a couple tablespoons of water to each bowl to thin the paint, making it only slightly thicker than water so that it acts more like a watercolor.

2.     Starting from light to dark, paint ¼ of the canvas light purple. Take the next darkest shade and paint the second quarter of the canvas. Wash the brush and using the lighter shade, brush across the canvas between the two color stripes to blend the colors. Continue in this fashion until the canvases are both painted. Let dry.

3.     Do a second coat on each canvas the same way as you painted the first one, making sure to wash your brush between colors. Once completed, wash out brush and from dark to light, brush horizontally across the canvas to smooth any paint lines. Let Dry.

4.     Using the Provided cut files, cut the "you're loved.." file to 5 inches tall and the other files to 11.5 inches tall (I made mine 16 inches wide and that made it a lot harder to keep them on the canvas and cut them). I’d recommend the 12” x 24” mat on these to fit them to the larger canvases.

5.     Weed the designs and cover with transfer paper. I prefer grid line transfer paper to help keep all your letters level.

6.     Transfer the designs onto your dry canvases. Press out any air bubbles and remove transfer paper, leaving the design behind.

These could easily be made in different colors to fit most wedding themes and were a fun twist on the traditional signs. Better yet, I already had everything to make them so they were free! :) Would you make these signs for your wedding?

No Sew Steamer Trunk Card Box

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

For my wedding, one of my best friends hand painted an adorable card box for us that I still have and love. So when my Gold Rustic Bride needed a card box, I decided to make her a card box too!

For this one, I actually ended up covering an old card box I had with fabric and decorating it with dark brown banding and antique gold upholstery trim to try to make it look a bit like a steamer trunk. Why? Because I always see this couple travelling and what cuter way to receive cards than a little trunk? :)

Now I outlined in the tutorial how I did this but honestly a lot of it was cutting, eyeballing and gluing fabric until it looked how I wanted it to so sorry if it’s a bit confusing! Hopefully the pictures will help if you want to make a card box too! :)

Supplies:

Card Box (I got mine from Michaels)
Beige Canvas Fabric
Teal Lining Fabric
Dark Brown Banding
Antique Gold Upholstery Trim
Glue (I would recommend Fabritac for this because my craft glue was much harder to use!)

Cover the Outside of the Box in Beige Fabric:

1.     Cover bottom and sides with beige fabric:  Run a line of glue along the top edges of the box and tuck the fabric into the crease. Let dry. Stretch fabric under card box and trim to fit into the crease of the other side. Glue fabric into the edge similar to the other side.

2.     You will notice the excess fabric around front and back: trim apx. ½” from the corner, glue flush to the front and back.

3.     Cover top sides: cut piece of fabric slightly larger than edges, run lines of glue along sides and under top, gluing fabric pieces in place. Let dry.

4.     Cover the front to lid: Measure and cut a piece of fabric that can wrap from the top front of your box over the lid and tuck under the front lip. Fold over long edge of the fabric and glue to create a clean edge. Line up edge of box to finished edge, then trim and fold over fabric on the other side to create a rectangle with two folded and glued seams that are the width of your box.

5.     Starting at the front, glue along the vertical edges of the box and glue fabric rectangle from the front of the box, under the bottom and over the lid. Glue edges into the creases as before.

Add Banding and Upholstery nails around the bottom and to the lid:

1.     Run lines of glue along the bottom of the box and secure banding around the perimeter. Let Dry.

2.     Measure and Cut a Strip of the Upholstery Nail Trim that goes all the way around the box. Using the nails provided, nail the trim around the box at the designated holes.

3.     There will likely be a little extra space if the perimeter of your box doesn’t perfectly align with the trim. Make the trim as close as you can and using some of the extra nails finish the pattern by nailing in the last few brads.

4.     Once the bottom is done, glue banding along the top edge of the lid of your box. Let Dry.

Line the Inside of the Box:

1.     Similar to covering the outside, start by cutting out two small strips to glue into the sides of the lid of your box. Stretch to fit and glue in place.

2.     Make a rectangle that is slightly larger than the inside of your box lid, then glue and fold over the edges to make a clean-lined fabric rectangle (like step 4 of covering the outside. Glue into the lid of your box, leaving the rough edge towards the bottom.

3.     Glue and tuck in two pieces of lining fabric for the inside front and back of your box. Make another rectangle with glued edges that are long enough to go down the side of your box, across the bottom, and up the other side of the box. Glue into the box along the edges and let dry.

Finish Banding around the Top of the Box:

1.     Along the edges where the teal and beige fabric meet, run glue along both sides of the edges of the box. Unfold the banding once so that it can be slipped over the top of the edge with banding on both sides.

2.     Secure banding in place with the glue lines and let dry.

Optional: Prop your Card Box open against a wall and glue in a piece of banding connecting the lid to the bottom of the box and let dry (I also clipped my pieces to the box while they dried for extra stability). This will help your box look pretty and stay open to receive cards! :)

Frosted Glass Guestbook Sign

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

So many weddings these days come with the cutest guest books, gone are the days of just a book and pen! My husband and I had people sign the mat of a picture frame, but I’ve seen puzzle pieces, messages in a bottle, and photobooks used as other great guest book alternatives! One thing you should think about with these guest books is to make sure your guests know they are supposed to sign it. With that in mind, I designed this lovely little Guestbook sign for the gold rustic wedding I have been DIYing for.

This is similar to the DIY Wedding Frames I did previously, but with just a little extra detail of the tree with the frosted glass to give a special touch to this sign. Originally I was going to do this with a mirror, but the silvery finish of the mirror and the gold made it look too Christmassy as opposed to wedding. However, if silver is one of your metallics, doing this project with a mirror instead of a frame would look beautiful!

Supplies:
Picture Frame (I used an 8” x 10” picture frame)
Removable Vinyl
White Vinyl
Scrapbook Paper
Frosted Glass Paint
Craft Cutter and Tool Set
Adhesive Mat
Sign our Guestbook Cut File

1.    Like the DIY Wedding Frames, trace and cutout the correct size of paper based on your frame and mount in your frame.

2.     Cut out your Tree or other design with the Cricut. I found a free piece of clipart for mine. Use removable vinyl and measure your glass to ensure that you make it the right size. Using transfer paper, affix your design onto your frame.

3.     Remove the glass from your frame or, if like mine your frame and glass are one piece, cover the frame with painter’s tape. Using your frosted glass paint, cover your picture frame or glass with 2 to 3 coats of paint, waiting between coats for the paint to dry. 

4.     Once the paint is dry, remove your vinyl tree design. Depending on how think your paint layer is, it is helpful to use the hook tool that comes with the Cricut or a toothpick to lift some of the skinnier branches while not pulling up the paint as well.

5.     Now, cut out the “Sign our Guestbook” Lettering with your craft cutter similar to the DIY Wedding Frames, but size the file based on the height and width of the frame you chose.

6.     Cut out the design, weed the excess vinyl and transfer it to the front of your frame with transfer paper and you are done!

I love that the frosted glass still shows the tree slab design on the paper and the actual tree design gives a little extra dimension to the whole sign. At the end of mine, I actually painted the frame a more champagne gold to go with the others I had made and it turned out perfect! What other wedding signs would you make for your wedding? :)

Easy DIY Wedding Signs

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

While Wedding Season really starts in late Spring I seem to have gotten all my wedding DIY fun in this September! Two of my sorority sisters are getting married this month and I have had so much fun making things for their big days!

One of the often overlooked details in wedding decorations are signs, so I have designed two simple ones for the Gift Table and Favor Table in 5 x 7 frames, so that they are easy to pack, look cute, and were super easy to make! This bride is having an upscale rustic wedding in golds, cream and teal, so I incorporated the rustic tree slices in the gold background paper with white lettering to make it easy to read and also give the signs an upscale feel. After all, white writing is far harder to come by than almost any other color with printers; luckily that’s where a craft cutter comes in handy!

The best part of this project is that is it totally customizable to your colors and theme, you simply have to pick the paper, frames, and colors that you want to personalize them for your big day!

Note: This post may contain affiliate links, meaning that if you click a link and make a purchase, I will receive a small commission. This costs nothing additional for you and I only promote items I use and love!

Supplies:
Picture Frames of Choice (I got mine from a Walmart a while back)
Scrapbook Paper
White Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Gifts and Cards Cut File
Thank you Sign Cut File

1.     Upload the Cut files into the Cricut Software and cut out on the vinyl color of your choice. I used removable vinyl and would recommend it if you want to use the frames again for a non-wedding purpose. I sized my cut files to be 6” wide.

2.     Cut out the sign lettering on your choice of vinyl. Weed out the excess vinyl. Using grid patterned transfer paper, measure and cut out two 5” x 7” pieces. Cut it out along the grid lines; it will make the vinyl transfer so much easier!

3.     Take the glass out of the frames and arrange the lettering where you would like it on the glass. If needed, you can tape the sides of the vinyl backing to keep it in place but I found it to be uneccesary.

4.     Lining up the Transfer paper to the top left corner of the glass, cover the entire piece of glass with the 5” x 7” transfer paper piece. Using a smoother or your hands, smooth out any air bubbles.

5.     Now, lift the transfer paper and vinyl design off the glass, making sure to not completely remove the transfer paper from the glass; keeping it stuck will keep your letters right where you wanted them! Once the vinyl design is removed from the backing, take the backing off the glass.

6.     Restick the transfer paper to the glass to adhere the lettering. Smooth out any air bubbles, then completely remove the transfer paper, leaving the lettering exactly where you wanted it on the glass.

7.     For the background in the frame, trace around the glass of your frames then cut it out with scissors. Place the background paper behind the glass in the frame and you are done!

While I made just the two signs for the Gift Table and Favor Table, you could also easily use this for table numbers, buffet signs, or your guestbook sign! I think I will do these again for my next shower; they are so easy and can be totally customized to whatever theme you want! What would you use these signs for? :)

Pomander Flower Frames

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

July is upon us and what does that mean? We are in the middle of Wedding Season! Better yet to me, we are in Bridal Shower Season, and I’ve been crafting for one of my best friend’s showers! I ended up being able to use a couple of the flowers leftover from the bouquets and decorations from a different wedding to make these cute little frame accents!

The best part of these is how easy they are to make; the floral foam makes it super simple as it already has the adhesive on the back and is the perfect size for making little pomander style accents to frames, signs, or table numbers. I made two types, one that was mixed hydrangeas, for my friend’s shower, and one that was spray roses for a more English feel.

Supplies:
Oasis Deco Mini Foam
Silk Flowers of your Choice (I used Purple Hydrangeas, Lilac Hydrangeas, and Spray Roses on mine)
8 x 10 Frame
Tacky Glue (Optional)

1.     Start by removing the heads of your silk flowers. Mine popped off no problem but you may need wire cutters based on the flowers you choose.

2.     Remove Floral Foam from its attached grid. Starting at the top of the round, push the head of the flowers into the foam. If they are having trouble staying put, use a little tacky glue to keep them in.

3.     Once you have arranged the flowers as you wish, remove the adhesive backing on the back of the foam. Stick directly to the picture frame you have chosen and you’re done!

Yep it’s really that simple and they look adorable! An added plus with this foam is that if you want to use real flowers, you can simply soak it in water beforehand and then press the flower heads directly into the foam like the silk ones, just make sure to keep a little bit of their stems on. Fresh flowers will last a couple days this way. These Flower frames are super easy to make and are a cute addition to any shower, as an extra accent to wedding signs or table numbers!