DIY Heart Wine Glass Place Cards

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

What better way to adorn your wine glasses in this lovely Valentine’s Season! I’m on a heart kick right now, probably due to really wanting to have a Galentine’s Brunch. :) For Galentine’s Day, Valentines Day, or any Wedding Celebration; these place cards are a cute and fun way to give your guests a glass and their table information.

I’ve made a couple place cards before but I want to try some Wine Glass Place cards again, but this time cutting them so they could sit on the edge of the glass. I started with a simple heart place cards that can easily be handwritten with your guest information. These ones are super simple, literally cut out, slight fold, and ready to go! :)

Supplies:
White Cardstock
Craft Cutter and Tool Set
Adhesive Mat
Heart Place Card Design File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save.  Copy and Paste the design for as many placecards as you want (1 standard sheet of paper will fit 6 hearts).

2. Cut the design(s) in your choice of card stock with the Light Card stock Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can. :) Load the Cricut with card stock (portrait orientation) and cut the designs.

Note: You’ll notice that I used a standard mat for this project, but I would recommend the Light Grip Mats for Paper Products. This just happens to be one of my older mats that’s not quite so sticky anymore :)

3. Remove the card stock from the outer edge, leaving the hearts on the cutting mat.

4. Peel off each place card from the edge of the design, leaving the extra paper on the cutting mat. Repeat with all hearts, then remove and discard all the card stock left on the cutting mat.

5. Using your finger, create a bend horizontally on the card, not folding the card but pressing it with your fingers into a curved shape. This will make it easier to sit nicely on the glass.

6. Place on the glass with the cut out “tab” side of the heart on the inside of the glass. Once your guest information has been written, they can be stored until you are ready to place them on the glasses of your event! :)

Paper Wine Glass Escort Cards

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

For the second wedding I helped with the bride wanted an escort card that could be placed in a small wine glass, which also happened to be the favor. With purple and silver as the colors and hearts as the escort card theme, I was off! I made these escort cards so that they could be hand written with the name and table number, but they would work best for a buffet meal so that you don’t have to find room to put people’s meal choices on there!

These escort cards also gave me the chance to try one of the features of my Cricut that I had never worked up the courage to use: the print to cut feature. And now that I have used it, I’m never going back! It made it so much easier to cut out the odd shape of these cards that I’m going to start designing wedding and party invitations for it to cut out too!

The wine glasses used were a little smaller than normal, so make sure to check the wine glasses you are using and size your cards appropriately.

Supplies:
White Cardstock
Craft Cutter and Tool Set
Adhesive Mat
Escort Card Cut File

1.     Import the cut file into the Cricut Desing Software. In this case, make sure to click outside the design to remove the white background from around the card, leaving the inside white.

2.     Save the file as a “Print to Cut” File and then import it into your project. I made my cards 3.25” wide which fit 3 to a sheet. These fit wine glasses that were 3.75” tall with a 2.25” opening. While I don’t know where they got their wine glasses, here are some cute ones from Beacoup that are the same size!

3.     Once you are ready to cut, go to the cut menu and print the number of sheets you need. I kept the “bleed” option check so that it will print the color slightly past the cut line so that the color is seamless on the edge. You can only print 10 at a time, but luckily by saving your cards as a project you can print them all and cut them later if you choose by selecting the same project.

4.     Once they are printed, affix your cardstock, 1 sheet at a time, to your cutting mat (I used a light grip mat) and cut them out with your Cricut. The Cricut will scan for the bold black lines printed around and then cut based on that scan. In my mind I was sure this wouldn’t work for some reason but it worked like a charm!

5.     Once all your cards are cut, handwrite guest names and tables onto the cards. Place in wine glasses when ready to present.

Once you get a hang of the print to cut feature (which will happen in the first 10 minutes of trying it) it’s just a matter of getting all the cards cut out. The Cricut makes such short work of the cutting. Even with the extra time it takes to scan, it could cut 12 cards in the time it took me to cut 3 by hand (and the Cricut cards were far better).  These turned out super cute and can easily be used for other weddings as well, and the best part is that, since they have a “stem” inside the wine glass, they don’t blow away in the wind! :) What did you use as escort cards for your wedding?

Vellum Paper Rose Escort Card Holders

This post contains affiliate links, meaning that if you click on a link I will recieve a small comission. This costs you nothing extra and I only promote products I use and love! You can read our full disclosure here

With all my leftover roses from the Beauty and the Beast Shower, I have been looking for a new home for them. Luckily, they worked out perfectly for my sorority sister’s Rustic Glam Gold Wedding! Her main flowers are white roses, so these beauties were the perfect accent to go with her existing floral arrangements. With that in mind, we decided these would be perfect as place card holders for her guests!

While the assembly of the flowers is the same as in the previous Vellum Roses post, there are a couple other steps to make them the perfect escort card holders. In particular, I used vinyl to color the leaves a pretty metallic gold to go with the wedding colors and then secured each place card with double sided tape to ensure that they all stayed with their flowers and were easy to set up the day of!

Supplies:
Cream Vellum
Paper Modgepodge
Hot Glue Gun and Glue Sticks
Escort Cards (I printed mine on cardstock and cut them into 2” x 3” rectangles)
Gold Vinyl (optional)

1.     Print, cut out, and assemble the roses like in the Vellum Roses tutorial. Take care to not fold or attach the leaf portions to your flowers yet.

2.     Design, print, and cut out your escort cards (I used the font Good Vibes and Bebas Neue). Using double sided tape, tape the back of the card to the front of one of the petals. I generally taped mine a few petals out from the center were the card was clearly readable. Once you have all your cards taped, set the flowers aside but try to keep them in whatever order you want them placed for the wedding.

3.     If you are using vinyl on your leaves, remove backing from your vinyl and lay it down on your work surface, adhesive side up. Arrange as many leaves as you can on the sheet and smooth them down, making sure there are no air bubbles. Using scissors, cut leaves out of the vinyl.

4.     Fold two of the three leaves as shown in the original tutorial. For the third leaf, fold in the opposite way as the other two leaves so that it will prop up the back of the flower.

5.     Using hot glue, attach the leaves to the flowers, making sure the “proper” leaf is in the back, perpendicular to the escort card.  (Sorry these are a little blurry!)

I wasn’t sure how I’d feel about the leaves being gold but as it turned out I adored it! With the roses being a little translucent themselves the gold leaves gave a magical quality to the roses, which of course I loved! I ended up being able to pack them up in a box with glass dividers so that they would move around and would stay in order for their trip up to their mountain wedding. What would you use for your escort cards?