More Bachelorette party flasks are here! :) I had so much fun when I first started designing different flasks, I ended up with a whole bunch of different designs that I’ll be publishing every few weeks and will be continuing to design more so there are oodles of options!

For these flasks, weeding is what you need to be careful of as both types of text are more delicate than some of the bolder fonts, but the results are well worth it! Just be patient and you shouldn’t have any difficulties. :)

Supplies:
Flasks
Permanent Adhesive Vinyl
Transfer Paper
Craft Cutter and Tool Set
Adhesive Mat
Flask Design Cut File

1. After downloading the cut files, import them into the Cricut Software. After creating a new project, select Upload Image. Select the file you wish to upload and it will automatically take you to the final upload screen, where you can name the file the select Save. 

2. Cut the design(s) in your choice of permanent adhesive vinyl with the Vinyl Setting on your Cricut. The SVG Files are sized so that they will automatically cut to the size you see in the photos, but if you want to change the size you can do so by BLAH

3. Once the designs are cut, weed away the extra vinyl and cut a piece of transfer taper to 3.5" x 5". Cut away any excess backing from the vinyl design and smooth transfer tape over the design, aligning it to the top of the text (i.e. the “Cheers” or “Future”) with 1 -1/2” block above the text, as shown below. Using the smoother tool, smooth the tape to the vinyl, removing any air bubbles. The transfer tape should overlap the backing of the design, so that you can stick the tape to an object with the backing still on the design.

4. Now, transfer the design to your flask. If you are comfortable centering the designs you can remove the tape from the backing and directly place the design on the flask. If not, arrange the design to be centered on the flask before removing the backing, sticking it with the overlapping transfer tape.

5. Once your design is placed to your satisfaction, carefully peel the tape off the backing, transferring the vinyl to the transfer tape while not unsticking it from the flask. Remove the backing then smooth the design onto the flask, once again using the smoother to remove any air bubbles.

6. Remove the transfer tape to leave the design on the flask, then repeat the process for all the additional flasks.